Elvox 46241.F08 User Manual

46
In Playback:
Click to choose the options. Right click to return to live mode.
In Backup:
Click to choose the options. Right click to return to previous picture.
In PTZ Control:
ClickleftbuttontochoosethebuttonstocontrolthePTZ.Clickrightbuttontoreturntolive.
Note: Mouse is the default tool for all operations unless an exception, as indicated.
3 Basic Function Instruction
3.1 Startup and Shutdown
Pleasemakesurealltheconnectionsaredoneproperlybeforeyoupowerontheunit.Properstartupandshutdownarecrucialtoexpandingthelifeofyour
NVR.
3.1.1 Startup
- Connect with the power.
-ThedevicewillbootandthepowerLEDwouldturnblue.
-AWIZARDwindowwillpopupandshowsomeinformationabouttimezone,timesetup,networkconguration,recordcongurationanddiskmanagement.
Youcansethereandrefertotheconcretesetupstepsfromthecorrespondingchapters.Ifyoudon’twanttosetupWizard,pleaseclick“Exit”buttontoexit.
Note:ThedefaultoutputisHDMIoutput.HoldandpressESCkeytoswitchtheresolutionoftheVGA&HDMIoutput.
3.1.2 Shutdown
YoucanshutdownthedevicebyusingIRremotecontrollerormouse.
-Goto
Main Menu and select “Shut Down” icon. This will take you to a shutdown window.
- Click OK. Then the unit will power off after a while.
- Disconnect the power.
3.2 Login
You can login or log off the NVR system. Once logged off you cannot do any other operation except changing the multi-screen display.
Fig3-1Login
Notice: The default user name is admin and the default password is 123456.
Forcompleteoperationalstepsforchangingpassword,addingordeletinguserpleaserefertosection5.7UsermanagementConguration.
3.3 Live preview
Fig3-2LivePreviewInterface
EN

Elvox 46241.F08 Specifications

General

Brand	Elvox
Model	46241.F08
Category	DVR
Language	English