Elvox 46241.F08 User Manual

54
5.3.4 Stamp
ThisprovidesanoptiontoenableordisabletheCameraNameandtheTimestamponthevideo.Theusercanalsochooseapositionforthestamponthe
screen.
To set up stamp as follows:
1- GotoMainMenu
Setup Record Stamp interface. Refer to Fig 5-13.
2- Checkmarkcameranameandtimestamp.Click“Setting”buttontosetupthepositionofthestamp.Youcandragthecameranameandtimestampat
randompositionsasshownbelow.
3 - Select “All” to set up all channels with the same parameters.
Fig5-14ScheduleConguration-Schedule
Fig5-13RecordConguration-Stamp
Before drag After drag
5.3.5 Recycle Record
ThisoptionisusedtorecycletheHDDspaceonceitisfull.Ifenabled,thesystemwillautomaticallydeletetheoldrecordsandrecyclethespaceifitiscom-
pletely utilized. The setting steps are as follows:
1-GotoMainMenu
Setup Record Recycle Record interface.
2-Checkmarkrecyclerecordtoactivateautorecycling.Iftheoptionisdisabledornotselected,theNVRwouldstoprecordingonceHDDisfull.
3-Click“Apply”buttontosavethesetting.
5.3.6 Snap
Inthisinterface,usercansetupresolution,quality,snapinterval,snapnumber.
5.4ScheduleConguration
Schedulecongurationincludesthreesubmenus:schedule,motionandsensor.
5.4.1 Schedule
Thistaballowsdeningschedulefornormalrecordingforsevendaysofaweek,24hoursofaday.Everyrowdenotesanhourlytimelineforaday.Clickthe
grid to do relevant setup. A highlighted area denotes selected timeline. Operate the following steps to set schedule:
1-GotoMainMenu Setup Schedule interface. Refer to Fig 5-14.
EN

Elvox 46241.F08 Specifications

General

Brand	Elvox
Model	46241.F08
Category	DVR
Language	English