100-412-196 REV. 06 55
5
Amplitude icon will flash. Press the Enter key to change the
parameters.
Amplitude parameter numbers will flash. Use the Up/Down
Arrow keys and the Left/Right Arrow keys to enter the
desired value, then press the Enter key to confirm the
selected value.
NOTICE
Reference image showing default Amplitude setting of 50%.
6
Off Time icon will flash. Press the Enter key to change the
parameters.
Off Time parameter numbers will flash. Use the Up/Down
Arrow keys and the Left/Right Arrow keys to enter the
desired value, then press the Enter key to confirm the
selected value.
NOTICE
Reference image showing default Off Time setting of
0.05 sec.
7
Ground Detect icon will flash. Press the Enter key to change
the parameters.
Ground Detect parameter numbers will flash. Use the Up/
Down Arrow keys and the Left/Right Arrow keys to enter the
desired value, then press the Enter key to confirm the
selected value.
NOTICE
These parameters will only be visible if the unit has the
optional Ground Detect feature installed.
NOTICE
Reference image showing default Ground Detect setting of
0.05 sec.
Table 6.5 Energy Mode Operational Sequence
Step Action Reference
To Next Page
Loading...
