Total units (tot U)Figure 5-11:
Multipliers convert the total for 1, 100, 1000, or 1 million units. The meter calculates the
total for display with the programmed multiplier and units.
A custom unit may be selected (CUST), and no multiplier menu is required. In this case, use
the total conversion factor as defined in the Custom units total conversion factor (totCF).
Press the Enter button at any time, to accept a setting or press the Menu button to exit
without saving changes.
Grand total units (GtotU)
Use this menu to select the display units for the grand total. Select the base unit and a
multiplier prefix. If grand total and units are selected to display, the multiplier prefix will
appear before the total unit (example: MGAL, KL).
Setup and programming
44 LTM Internal Display
To Next Page
Loading...
