Emerson Daniel 3410 Series Maintenance And Troubleshooting Manual

2.3.2 Microsoft
®
Excel
®
Log/Export options are not available
In order for the Excel
®
log/export options to be available, Excel
®
2000 or later must be
installed on the machine and at least one printer must be installed under Windows
®
. If
Excel
®
®
2000 or later is installed and you have printers installed but the Excel
®
®
option is
still unavailable, it may be because Excel
®
®
cannot access the printer driver information of
the Windows
®
default printer. If the Windows
®
default printer is a network printer and you
are not currently connected to the network, then Excel
®
®
will most likely not be able to
access the printer driver information and Daniel MeterLink
™
cannot use Excel
®
®
to
generate reports or logs. One solution is to install a local printer on your machine tied to
LPT1. The local printer driver you installed can be for any printer and the printer does not
actually have to exist or be connected to the PC. If you install a local printer, you can
configure Daniel MeterLink to temporarily change your Windows
®
default printer over to
this local printer while running Daniel MeterLink. Do this by selecting this local printer for
the Override system default printer selection in the Program Settings dialog. Daniel
MeterLink will automatically change the Windows
®
®
default printer to the selected
override printer when it starts and will set the Windows
®
®
default printer back to its
original printer when it closes.
2.3.3 Maintenance logs or trend files are not created
When using Excel
®
XP or later, some of the worksheets in the Maintenance Logs or Trend
files are not created. If the Inspection sheet of the Maintenance Log file or the Charts sheet
of a Trend files are not generated, it is probably because Excel
®
is not configured to allow
Daniel MeterLink to run the Visual Basic
®
script that generates the page. Excel
®
can be
configured to allow Daniel MeterLink to run the Visual Basic
®
script by following the
instructions below.
To enable Excel
®
2000 to work with Daniel MeterLink,
Procedure
1. Select Tools>Macros>Security menu path.
Troubleshooting
Maintenance and Troubleshooting manual 37

Emerson Daniel 3410 Series Specifications

General

Brand	Emerson
Model	Daniel 3410 Series
Category	Measuring Instruments
Language	English