Emerson Daniel 3410 Series Maintenance And Troubleshooting Manual

Conversion factors per units of measurement (continued)Table A-1:
Conversion factors Unit of measurement
6.289811 bbl/m
3
10
-3
Pa•s/cPoise
1.488 Pa•s/(lb/(ft•s))
A.2 K-Factor and inverse K-Factor
Frequency volumetric flow rate K-Factor Equation A-1:
 =


 3600ℎ
*
and
Frequency volumetric flow rate inverse K-Factor Equation A-2:
 =
 3600ℎ


*
where
KFactor
frequency “K-Factor” (pulses/volume**) (Freq1KFactor and Freq2KFactor)
InvKFactor
frequency “Inverse K-Factor” (volume**/pulse) (Freq1InvKFactor and
Freq2InvKFactor)
FreqQ
FullScale
frequency full-scale volumetric flow rate (volume**/time unit*)
(Freq1FullScaleVolFlowRate and Freq2FullScaleVolFlowRate)
MaxFreq
maximum frequency (Hz = pulses/time unit*) (Freq1MaxFrequency and
Freq2MaxFrequency)
* TimeUnit
time conversion factor depends on the VolFlowRate Time Unit data point:
• volume/second = 1 s/s
• volume/minute = 60 s/m
• volume/hour = 3600 s/h
• volume/day = 86400 s/d
** Volume
where the volume is selected via data points:
• Units System
• VolUnitUS
- gallons
Conversion factors
88 Gas Ultrasonic Flow Meters

Emerson Daniel 3410 Series Specifications

General

Brand	Emerson
Model	Daniel 3410 Series
Category	Measuring Instruments
Language	English