NOTICE
Prior to lifting the unit, refer to the Daniel Gas Ultrasonic Flow Meter nameplate or outline
dimensional (general arrangement) drawing for the assembled weight.
WARNING!
CRUSHING HAZARD
Do not remove flange stabilizers.
Attempting to do so may allow the meter to roll, resulting in serious injury or equipment
damage.
A. Flange stabilizers
WARNING!
FLUID CONTENTS MAY BE UNDER PRESSURE
When the meter is under pressure, DO NOT attempt to remove or adjust the transducer holder.
Attempting to do so may release pressurized gas or fluid, resulting in serious injury or
equipment damage.
Meter repairs
42 Gas Ultrasonic Flow Meters
To Next Page
Loading...
