Emerson FB1200 - Indirect Mount; Coplanar Mounting Kit; Inline Mounting Kit

Emerson FB1200 Flow Computer Instruction Manual
D301782X012
March 2019
Installation 23
Figure 2-16: Coplanar Mounting Kit
1
Tubular L-shaped bracket
2
3/8-16 x 1 ½ in socket head wire lockable screw (2) – Apply Killark® LUBG-6 Thread
Lubricant to threads. Torque screws to 30 in-lbs (3.4 N m)
3
Split 3/8 lock washer (2)
4
5/16-18 keps nut (2). Apply Loctite 222 Low Strength Purple Threadlocker to nuts. Torque
nuts to 30 in-lbs (3.4 N m)
5
U-bolt bracket
6
2-inch diameter pipe U-bolt
2.7.4 Indirect Mount
You can mount the flow computer to a two-inch pipe or pole. Indirect mount installations use an
inline mounting kit.
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.