Emerson Liebert APS - Bezel Filter; Bottom Fan Filter-Transformer-Based Frames Only; Figure 75 Replace;Clean the Bezel Filter; Figure 76 Replace;Clean the Bottom Fan Filter

Maintenance
Liebert
®
APS
™
68
6.3.2 Bezel Filter
1. Remove the bezel from the frame.
2. Remove the filter assembly from the bezel, as shown in Figure 75, and clean the filters as
described above.
3. Restore the filter and small plastic bezel of the frame.
Figure 75 Replace/clean the bezel filter
6.3.3 Bottom Fan Filter—Transformer-Based Frames Only
1. Remove the three lower bezels at the bottom of the frame.
2. Remove the screws and take out the filter, as shown in Figure 76, and clean the filters as
described above.
3. Replace the filter and bezels.
Figure 76 Replace/clean the bottom fan filter
Bottom Fan Filters