Essential instructions
Read this page before proceeding!
Emerson designs, manufactures, and tests its products to meet many national and international standards. Because
these instruments are sophisticated technical products, you must properly install, use, and maintain them to ensure
they continue to operate within their normal specifications. You must adhere to the following instructions and
integrate them into your safety program when installing, using, and maintaining Emerson's Rosemount products.
Failure to follow the proper instructions may cause any one of the following situations to occur: loss of life, personal
injury, property damage, damage to this instrument, and warranty invalidation.
• Read all instructions prior to installing, operating, and servicing the product.
• If this reference manual is not the correct one, call 1-800-854-8257 or 949-757-8500 to request the correct
reference manual. Save this reference manual for future reference.
• If you do not understand any of the instructions, contact your Emerson representative for clarification.
• Follow all warnings, cautions, and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation, and maintenance of the product.
• Install equipment as specified in the installation instructions of the appropriate Quick Start Guide and per
applicable local and national codes. Connect all products to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program, and maintain the
product.
• When replacement parts are required, ensure that qualified people use replacement parts specified by Emerson.
Unauthorized parts and procedures can affect the product's performance, place the safe operation of your
process at risk, and may result in fire, electrical hazards, or improper operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance is being
performed by qualified people, to prevent electrical shock and personal injury.
WARNING
Hazardous area installation
Qualified on-site safety personnel must carefully evaluate installations near flammable liquids or in hazardous
areas.
This device is not Intrinisically Safe or Explosion Proof.
To secure and maintain intrinsically safe installation, use an appropriate transmitter/safety barrier/sensor
combination. The installation system must be in accordance with the governing approval agency (FM, CSA, or
BASEEFA/CENELEC) hazardous area classification requirements. Consult your transmitter Reference Manual for
details.
Proper installation, operation, and servicing of this sensor in a hazardous area installation are entirely the
operator's responsibility.
2
To Next Page
Loading...
Need help?
General
