7 Programming the transmitter
7.1 Entering the Program menus
Complete the following steps to access the Program menus on your 56 Transmitter.
Procedure
1. With the main display showing, press ENTER/MENU to display the main menu.
2. Move the cursor to Program and press ENTER/MENU.
3. Move the cursor to the tab showing the desired submenu and press ENTER/MENU.
A fifth tab, not shown, labeled pH diagnostics setup, will be present if one of the
sensors is a pH sensor.
Reference Manual Programming the transmitter
00809-0200-3415 January2023
Rosemount TCL 56 35
To Next Page
Loading...
