6.2 Keypad
Local communication with the transmitter is through the membrane keypad.
See Figure 6-2.
Figure 6-2: Transmitter Keypad
A. Press INFO to get more information about the control setting or calibration step the
cursor is on. To close the INFO box, press any key.
B. Use the alphanumeric keypad to enter numbers or letters.
C. When the main display is showing, press ENTER/MENU to view the main menu. In other
cases, press ENTER/MENU to select an item for editing or to store a change.
D. Four navigation keys move the cursor up, down, left, and right.
E. Press EXIT to return the display to the first screen in a series of related screens. Changes
that have not been stored will not be saved.
6.3
Operation
The operation of the Rosemount 56 Transmitter can best be understood from the following
example.
Procedure
1. With the main display showing (Figure 6-1), press ENTER/MENU.
The main Menu, shown below, appears.
Important
Pressing the ENTER/MENU key will bring up the main Menu only if the main display
is showing.
Note that the current reading and temperature for sensor 1 (S1) and sensor 2 (S2), if
applicable, always appear at the top of the screen.
The cursor (dark blue backlit field) is on Calibrate.
Display and operation Reference Manual
January2023 00809-0200-3415
28 Emerson.com/Rosemount
To Next Page
Loading...
