2. Press Down to move the cursor to Program.
3. Press ENTER/MENU.
The cursor is on Outputs, and the first screen in the Outputs submenu is showing.
4. To select a different program submenu, use Right to move the cursor to the desired
tab and press ENTER/MENU.
5. To enter the Outputs submenu, press Down.
The cursor moves to the first control box, Output. The Rosemount 56 has four
analog outputs, and this control lets you select which output to configure. The
default is output 1.
6. To select a different output, press ENTER/MENU.
A list of the available outputs, shown two at a time, appears.
7. To view the list, press and hold Up or Down. To select and store the highlighted
selection, press ENTER/MENU. To move from one control box to another, press Up
or Down.
Reference Manual Display and operation
00809-0200-3415 January2023
Rosemount TCL 56 29
To Next Page
Loading...
