12
Occupancy Sensor Installation
Mounting the Occupancy Sensor (Optional)
➤ Select the appropriate installation location for the external occupancy sensor,
taking into account the following;
➤ With the faceplate removed, place the sensor on the wall in the installation
location and mark location for drilling holes for the two (2) mounting screws;
➤ Drill two (2) 3/16” holes in the wall and insert the two (2) supplied wall
anchors;
➤ Use the two (2) supplied screws to securely mount the sensor to the wall;
➤ Insert (2) AA batteries into the compartment (not supplied - wireless sensors
only)
THE OCCUPANCY SENSOR SHOULD FACE THE DESIRED OCCUPANCY
DETECTION AREA.
To Next Page
Loading...
