7
Network Installation
Connecting the Antenna Module
➤ Screw the Antenna onto the Wireless Receiver;
➤ Connect the Wireless Receiver to the Server using the supplied USB cable;
➤ Afx the Wireless Receiver to the wall with double sided adhesive tape (not
supplied);
➤ Orient the antenna to be parallel to the closest room in which a Verdant
thermostat will be installed.
THE WIRELESS RECEIVER AND THE ANTENNA MUST NOT BE INSTALLED NEAR
METAL STRUCTURES OR SURFACES.
METAL STRUCTURES AND SURFACES SIGNIFICANTLY REDUCE THE RANGE OF THE
WIRELESS SIGNAL.
To Next Page
Loading...
