6
NOTICE
TO ENABLE NETWORKING CAPABILITIES OF THE VX THERMOSTAT, REFER
TO THE “NETWORK INSTALLATION” SECTION OF THIS MANUAL.
BEFORE STARTING THE INSTALLATION OF THE NETWORKED THERMOSTATS,
ENSURE THAT THE ONLINE CONNECTION KIT IS CONNECTED TO THE
INTERNET.
THE ONLINE CONNECTION KIT MUST BE PLUGGED INTO AN INTERNET
PORT WITH A STATIC IP ADDRESS WITH DHCP ACTIVE. THE ONLINE
CONNECTION KIT MUST BE WHITELISTED USINGS ITS MAC ADDRESS
WITH UNRESTRICTED INTERNET ACCESS. INBOUND/OUTBOUND
COMMUNICATION PORTS ARE 80,443, AND 22.
PLEASE CONFIRM WITH A VERDANT TECHNICAL SUPPORT AGENT THAT
THE ONLINE CONNECTION KIT IS COMMUNICATING PROPERLY WITH THE
CLOUD SERVICE BY CALLING OUR TECHNICAL SUPPORT TEAM AT 1 877 318
1823.
Network Installation
To Next Page
Loading...
