Emerson VERDANT VX Series - Installing the Wireless Sensor Receiver (Optional - Wireless Sensors Only)

13
Occupancy Sensor Installation
Installing the Wireless Sensor Receiver (Optional - Wireless Sensors Only)
➤ Plug the Sensor Receiver and plug it into the thermostat;
➤ With the faceplate removed, place the sensor on the wall in the installation
location and mark location for drilling holes for the two (2) mounting screws;
➤ Drill two (2) 3/16” holes in the wall and insert the two (2) supplied wall
anchors;
➤ Use the two (2) supplied screws to securely mount the sensor to the wall;
➤ Insert (2) AAA batteries into the compartment (wireless sensors only)