4.5.3 SNMP
The Simple Network Management Protocol (SNMP) is used for exchanging information
between network devices. It enables a host computer to access configuration, performance,
and other system data that resides in a database on the modem. The host computer is called a
management station and the modem is called an SNMP agent. The data that can be accessed
via SNMP is stored in a Management Information Database (MIB) on the modem.
Get Community: Select to set the password for incoming Get- and GetNext request from
management station.
Set Community: Select to set the password for incoming Set request from management
station.
4.5.4 UPnP
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses
TCP/IP for simple peer-to-peer network connectivity between devices. An UPnP device can
dynamically join a network, obtain an IP address, convey its capabilities and learn about other
devices on the network. In turn, a device can leave a network smoothly an automatically when
it is no longer in use. UPnP broadcasts are only allowed on the LAN.
UPnP (Universal Plug and Play): You can choose “Activated” or “Deactivated” option from
this session.
63
Auto-Configured (by UPnP Application): UPnP network devices can automatically
configure network addressing, announce their presence in the network to other UPnP devices
and enable exchange of simple product and service descriptions. Choose “Activated” option
to allow UPnP-enabled applications to automatically configure the ADSL Router so that they
can communicate through the ADSL Router, for example by using NAT traversal, UPnP
To Next Page
Loading...
Need help?
General
