Step 5: Set Wireless LAN connection
Click “Enable” to enable wireless LAN. If user enables the wireless LAN, type the SSID in the
text box and select a communications channel. The SSID and channel must be the same as
wireless devices attempting communication to the router.
Figure 31.
Step 6: Restart
The Setup wizard is now completed. The new settings will be effective after the Wireless router
restarted. Please click “Restart” to reboot the router. If user does not want to make any changes,
please click “Exit” to quit without any changes.
Figure 32.
22
To Next Page
Loading...
