EasyManuals Logo

Encore ENHWI-G3 User Manual

Encore ENHWI-G3
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
PPPoE with Obtain IP Automatically
If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the ISP will provide a
Password and User Name, and then the ISP uses PPPoE. Choose this option and enter the
required information.
Figure 34.
24

Other manuals for Encore ENHWI-G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Encore ENHWI-G3 and is the answer not in the manual?

Encore ENHWI-G3 Specifications

Transmission and Reception IconTransmission and Reception
transmission rate (802.11b)1, 2, 5.5, 11 Mbps
transmission rate (802.11g)6, 12, 24, 36, 48, 54 Mbps
receiver sensitivity (54Mbps)-70 @ 10% PER
receiver sensitivity (11Mbps)-85 @ 8% PER
wireless LAN frequency range2412 ~ 2484 MHz
Transmit Power and Antennas IconTransmit Power and Antennas
transmit power (802.11b)15±2 dBm
transmit power (802.11g)13±2 dBm
antenna typeDual diversity antennas
external antenna gain2 dB
Interface and Ports IconInterface and Ports
LAN ports4 x 10/100 Mbps Auto-MDIX Ethernet ports
WAN port1 x 10/100 Mbps Auto-MDIX Ethernet port
interfaceLAN, WAN
Power and Temperature IconPower and Temperature
power adapter voltage7.5 V
power adapter current1 A
operation temperature0 ~ 40 °C
storage temperature-10 ~ 70 °C
Dimensions and Environmental IconDimensions and Environmental
dimensions (W x H x D)147 x 115 x 35 mm
range coverage indoorUp to 30 meters
range coverage outdoorUp to 100 meters
humidity10% ~ 95% RH, no condensation

Related product manuals