DHCP
Figure 50.
DHCP Server: Enables the DHCP server to allow the router to automatically assign IP
addresses to devices connecting to the LAN. DHCP is enabled by default.
DHCP Server Start IP: Type an IP address to serve as the start of the IP range that DHCP will
use to assign IP addresses to all LAN devices connected to the router.
DHCP Server End IP: Type an IP address to serve as the end of the IP range that DHCP will
use to assign IP addresses to all LAN devices connected to the router.
Lease Time: The lease time specifies the amount of connection time a network user be
allowed with their current dynamic IP address.
Add Static DHCP: Selected Enable the Static DHCP allows you to assign a static IP address to
the PC that has the IP address and MAC address mapping set in the Static DHCP List.
Static DHCP List: The static DHCP mapping will list in the table, providing the Host Name,
MAC Address and IP Address.
Dynamic DHCP List: All dynamic DHCP client computers are listed in the table and
providing the Host name, IP address, and MAC address and Expired Time of the client.
34
To Next Page
Loading...
Need help?
Transmission and Reception
