Access Control Setting
This access control enables you to define access restrictions, set up protocol and IP filters,
create virtual servers, define access for special applications such as games, and set firewall
rules.
Filter
Using filter to deny or allow the users to access. Five types of filters to select: MAC, IP Filter,
URL blocking, Domain blocking and Protocol filter.
MAC Filters
Figure 51.
MAC Filter: Enables you to allow or deny Internet access to users within the LAN based upon
the MAC address of their network interface. Click the radio button next to Disabled to disable
the MAC filter.
Disable: Disable the MAC filter function.
Allow: Only allow computers with MAC address listed in the MAC Table.
Deny: Computers in the MAC Table are denied Internet access.
MAC Table: Use this section to create a user profile which Internet access is denied or allowed.
The user profiles are listed in the table at the bottom of the page. (Note: Click anywhere in the
item. Once the line is selected, the fields automatically load the item's parameters, which you
can edit.)
Name: Type the name of the user to be permitted/denied access.
35
To Next Page
Loading...
Need help?
Transmission and Reception
