Log Setting
This function enables users to set Router Log parameters.
Figure 63.
SMTP Server: Type your SMTP server address here.
Send to: Type an email address for the log to be sent to. Click “Email Log Now” to
immediately send the current log.
SMTP Authentication: Selected the Enabled if the SMTP server need for authentication, fill in
account name and password in SMTP Account field and SMTP Password field.
SMTP Account: If the SMTP Authentication enabled, fill in the SMTP account name here.
SMTP Password: If the SMTP Authentication enabled, fill in the password of the SMTP
account here.
Syslog Server: Type the IP address of the Syslog Server if user wants the WLAN Router to
listen and receive incoming Syslog messages.
Log Type: Enables users to select what items will be included in the log:
System Activity: Displays information related to WLAN Router operation.
Debug Information: Displays information related to errors and system malfunctions.
Attacks: Displays information about any malicious activity on the network.
Dropped Packets: Displays information about packets that have not been transferred
successfully.
Notice: Displays important notices by the system administrator.
48
To Next Page
Loading...
