Deltabar S
Endress+Hauser 9
Permitted devices types
The details pertaining to functional safety in this manual relate to the device versions listed below and
are valid as of the specified software and hardware version. Unless otherwise specified, all subsequent
versions can also be used for safety functions. A modification process according to IEC 61508 is applied
for device changes.
Device versions valid for use in safety-related applications: PMD75
Device versions valid for use in safety-related applications: FMD77 with diaphragm seal
Ordering feature Option
010 Approval all
020 Output; Operation A 4-20 mA HART; extern. + LCD
B 4-20 mA HART; inside + LCD
C4-20 mA HART; inside
D 4-20 mA HART; Li = 0; extern. + LCD
E 4-20 mA HART; Li = 0; inside + LCD
F 4-20 mA HART; Li = 0; inside
030 Housing; Cover Sealing; Cable Entry all
040 Nominal Range; Cell Material; PN all
050 Calibration; Unit all
060 Membrane Material all
070 Process Connection all
080 Seal all
100 Additional Option 1 E SIL Declaration of Conformity
or
110 Additional Option 2 E SIL Declaration of Conformity
Ordering feature Option
010 Approval all
020 Output; Operation A 4-20 mA HART; extern. + LCD
B 4-20 mA HART; inside + LCD
C4-20 mA HART; inside
D 4-20 mA HART; Li = 0; extern. + LCD
E 4-20 mA HART; Li = 0; inside + LCD
F 4-20 mA HART; Li = 0; inside
030 Housing; Cover Sealing; Cable Entry all
040 Nominal Range; Cell Material; PN all
050 Calibration; Unit all
060 Membrane Material all
070 Process connection; LP Side; Seal all
080 Process Connection; High Pressure Side all (see the following "Warning" ä 10)
090 Fill Fluid all
100 Additional Option 1 E SIL Declaration of Conformity
or
110 Additional Option 2 E SIL Declaration of Conformity
To Next Page
Loading...
