Deltapilot S FMB70 Design
Endress+Hauser 7
2.3 Supplementary device documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number
from the nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or
scan the matrix code on the nameplate
The following document types are available in the Downloads section of the
Endress+Hauser website (www.endress.com/downloads):
2.3.1 Further applicable documents
• TI00416P
• BA00332P
• KA00218P
• KA01020P
• BA00274P (Description of Device Functions)
2.3.2 Technical Information (TI)
Planning aid
The document contains all the technical data on the device and provides an overview of
the accessories and other products that can be ordered for the device.
2.3.3 Operating Instructions (BA)
Your reference guide
These Operating Instructions contain all the information that is required in various phases
of the life cycle of the device: from product identification, incoming acceptance and
storage, to mounting, connection, operation and commissioning through to
troubleshooting, maintenance and disposal.
2.3.4 Brief Operating Instructions (KA)
Guide that takes you quickly to the 1st measured value
The Brief Operating Instructions contain all the essential information from incoming
acceptance to initial commissioning.
2.3.5 Certificate
The associated certificate is available in the Endress+Hauser W@M Device Viewer or can
be found in the declaration of conformity of the applicable Functional Safety Manual. This
certificate must be valid at the time of delivery of the device.
3 Design
3.1 Permitted devices types
The details pertaining to functional safety in this manual relate to the device versions
listed below and are valid as of the specified firmware and hardware versions.
Unless otherwise specified, all subsequent versions can also be used for safety functions.
To Next Page
Loading...
