Commissioning (installation and configuration) Deltapilot S FMB70
12 Endress+Hauser
4.2 Installation
The mounting and wiring of the device and the permitted orientations are described in the
Operating Instructions pertaining to the device.
Correct installation is a prerequisite for safe operation of the device.
4.3 Commissioning
The commissioning of the device is described in the Operating Instructions pertaining to
the device.
Prior to operating the device in a safety instrumented system, verification must be
performed by carrying out a test sequence as described in Section 6 Proof testing.
4.4 Operation
The operation of the device is described in the Operating Instructions pertaining to the
device.
4.5 Device configuration for safety-related applications
4.5.1 Calibration of the measuring point
For more information, see the Operating Instructions.
4.5.2 Configuration methods
Increased security during parameter entry
The following conditions are permitted and recommended for devices without a local
display that are to be used in process control safety systems:
• Via the FieldCare/DeviceCare operating program and DTM with firmware version ≥
02.10
• Via the Field Communicator handheld terminal and Device Description with device
revision ≥ 21
This parameter configuration method is a software function implemented in the device
and comprises automated parameter confirmation and device locking.
Parameter configuration via local display
1. Reset parameters to factory setting: reset code "7864" (see the associated Operating
Instructions, "Resetting to factory setting (reset)" section). Check default values,
number formats and parameter descriptions with the "Device parameter
configuration report".
2. Configure the device.
3. Enter the settings for the following parameters according to the report, since these
settings are queried for safe device configuration.
Parameter Available in the operating mode Group
Pressure Level, level selection
"Level easy pressure"
ACK. ALARM MODE X X MESSAGES
CALIB. OFFSET X X POSITION ADJUST.
To Next Page
Loading...
