Commissioning
33
Submenu:
Date/time set-up
Here you can find various date and time settings.
Fig. 22: Set up, Basic settings, "Date/time set-up" submenu
Date format Select in which format the date is to be set and displayed. (DD.MM.YYY)
Time format Select in which format the time is to be set and displayed. Picklist: 12 hours AM/PM or
24 hours
Actual date Set up the actual date for the unit.
Actual time Set up the actual time for the unit.
NT/ST changeover Function for summer time/normal time changeover.
“Automatic”: changes as per the local regional regulations
“Manual”: changeover times can be set in the following addresses
“Off”: no changeover times required
NT/ST region
only at "NT/ST changeover automatic"
Selects the regional settings for summer/normal time changeover. Picklist: Europe,
USA
Date NT -> ST
only at "NT/ST changeover manual"
Day, when in the spring a change from normal to summer time occurs.
Time NT -> ST
only at "NT/ST changeover manual"
Time when the time is moved forward by 1 hour on the day of the changeover from
normal time to summer time. (Format: hh:mm)
Date ST -> NT
only at "NT/ST changeover manual"
Day, when in the autumn a change from summer to normal time occurs.
Time ST -> NT
only at "NT/ST changeover manual"
Time when the time is moved back by 1 hour on the day of the changeover from
summer time to normal time. (Format: hh:mm)
"Basic settings"
menu items
Configurable parameters
(Factory settings bold marked)
To Next Page
Loading...
Need help?
General