Endress+Hauser iTEMP TMT71 - Page 57

DRAFT
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
DRAFT DRAFT DRAFT
68.5 (2.7)
15.5 (0.6)
91.6 (3.61)
15.5 (0.6)
89.5 (3.52)
20.5 (0.8)
iTEMP TMT71/72 Technical data
TA30A Specification
107.5 (4.23)
• Two cable entries
• Temperature: –50 to +150 °C (–58 to +302 °F) without cable
gland
• Material: aluminum, polyester powder coated
Seals: silicone
• Cable entry glands: 1/2" NPT and M20x1.5
• Color of head: blue, RAL 5012
• Color of cap: gray, RAL 7035
• Weight: 330 g (11.64 oz)
28
(1.1)
78 (3.1)
A0009820
TA30A with display window in cover Specification
107.5 (4.23)
• Two cable entries
• Temperature: –50 to +150 °C (–58 to +302 °F) without cable
gland
• Material: aluminum, polyester powder coated
Seals: silicone
• Cable entry glands: 1/2" NPT and M20x1.5
• Color of head: blue, RAL 5012
• Color of cap: gray, RAL 7035
• Weight: 420 g (14.81 oz)
28
(1.1)
78 (3.1)
A0009821
TA30H Specification
125 (4.92)
78 (3.01)
• Flameproof (XP) version, explosion-protected, captive screw
cap, with two cable entries
• Temperature: –50 to +150 °C (–58 to +302 °F) for rubber seal
without cable gland (observe max. permitted temperature of
cable gland!)
• Material:
– Aluminum with polyester powder coating
– Stainless steel 316L without coating
• Cable entry glands: ½" NPT, M20x1.5
• Color of aluminum head: blue, RAL 5012
• Color of aluminum cap: gray, RAL 7035
• Weight:
– Aluminum: approx. 640 g (22.6 oz)
– Stainless steel: approx. 2 400 g (84.7 oz)
A0009832
Endress+Hauser V. 1, Rev. 2, 4-10-2018 57
28
(1.1)