Operating menu and parameter description iTEMP TMT71/72
Navigation Application → Measured values → Sensor value
Description Displays the current measured value at the sensor input.
Sensor raw value
Navigation Application → Measured values → Sensor raw value
Description Displays the non-linearized mV/Ohm value at the specific sensor input.
Output current
Navigation Application → Measured values → Output current
Description Displays the calculated output current in mA.
Percent of range
Navigation Application → Measured values → Percent of range
Description Displays the measured value in percentage of the span
Device temperature
Navigation Application → Measured values → Device temperature
Description Displays the current electronics temperature.
PV
Navigation Application → Measured values → PV
Description Displays the primary HART value
SV
72 V. 1, Rev. 2, 4-10-2018 Endress+Hauser
To Next Page
Loading...
