DRAFT
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
DRAFT DRAFT DRAFT
iTEMP TMT71/72 Operating menu and parameter description
Configuration counter
Navigation System → Device management → Configuration counter
Description Displays the counter reading for changes to device parameters.
Static parameters, whose values change during optimization or configuration, cause
this parameter to increment by 1. This support parameter version management. If
several parameters change, e.g. as a result of loading parameters from FieldCare etc.
to the device, the counter can show a higher value. The counter cannot be reset and is
also not reset to the default value when the device is reset. If the counter overflows,
(16 bit), it starts again at 1.
Configuration changed
Navigation System → Device management → Configuration changed
Description Displays whether the configuration of the device has been changed by a master (primary
14.3.2 User management submenu
Define password →
Maintenance
Change user role →
Operator
Recover password →
Operator
Change password →
Maintenance
Delete password →
Maintenance
New password
Confirm new password
Status password entry
Password
1)
Status password entry
Recover password
Status password entry
Old password
New Password
Confirm new password
Status password entry
Delete password
1) The preferred user role must be chosen here in the operating menu via the SmartBlue App.
Endress+Hauser V. 1, Rev. 2, 4-10-2018 83
To Next Page
Loading...
