Endress+Hauser iTEMP TMT71 - Page 86

DRAFT
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
DRAFT DRAFT DRAFT
Operating menu and parameter description iTEMP TMT71/72
User entry Activate the text box and enter the reset code.
Status password entry
Navigation System → User management → Recover password → Status password entry
Description →  85
Logout
Navigation System → User management → Logout
Prerequisite The Maintenance user role must be active.
Description The Maintenance user role is exited and the system switches to the Operator user role.
User entry Activate the button.
Change password
Navigation System → User management → Change password
Prerequisite The Maintenance user role must be active.
Description • Old password:
Use this function to enter the current password to then be able to make changes to the
existing password.
• New password: →  83
• Confirm new password: →  83
User entry • . . . . . . . . (enter the old password)
• . . . . . . . . (enter the new password)
• . . . . . . . . (confirm the new password)
Status password entry
Navigation System → User management → Change password → Status password entry
Description →  85
86 V. 1, Rev. 2, 4-10-2018 Endress+Hauser