Liquiline CM442/CM444/CM448 Operation
Endress+Hauser 91
You can monitor the manipulated variable by assigning the controller manipulated variable
to a limit switch (e.g. configure a dosing time alarm).
Cond i Options
•Temperature
• Conductivity
• Resistance (only Cond c)
• Concentration (only Cond i)
Cond c
Chlorine Options
•Temperature
•Current
• Concentration
ISE Options
•Temperature
•pH
•Ammonium
•Nitrate
• Potassium
•Chloride
TU/TS Options
•Temperature
•Turbidity g/l
•Turbidity FNU
Nitrate Options
•Temperature
•NO3
•NO3-N
Ultrasonic interface(interface
measurement)
Options
•Interface
•Turbidity
SAC Options
•Temperature
•SAC
•Transm.
•Absorption
•COD
•BOD
Controller 1 Options
• Bipolar(only current outputs)
•Unipolar+
•Unipolar-
Controller 2
Mathematical functions All the mathematical functions can also be used as a data source and the
calculated value can be used as the measured value.
Measured valuedepending on theSource of data
Source of data Measured value
To Next Page
Loading...
