Endress+Hauser Micropilot FMR56 - Page 41

Micropilot FMR56, FMR57
Endress+Hauser 41
H
H
max
øD
1
2
A0016827
 23 Nozzle mounting of Micropilot FMR57 with parabolic antenna
1 Antenna completely projects out of the nozzle
2 Antenna completely inside the nozzle
Antenna Antenna diameter D Nozzle height H for Case 1 Maximum nozzle height H
max
for Case 2
Parabolic antenna
200mm/8"
173 mm (6.81 in) < 50 mm (1.97 in) 500 mm (19.7 in)
Parabolic antenna
250mm/10"
236 mm (9.29 in) < 50 mm (1.97 in) 500 mm (19.7 in)
Examples for installation with small flange
If the flange is smaller than the parabolic reflector, the device can be mounted in one of the
following ways:
• Standard installation, the parabolic reflector must be dismantled in this case
• Installation with hinged flange
Standard installation
H
øD
1
A0018874
1 Nozzle
Antenna size ØD H
(without antenna extension)
200 mm (8 in) 173 mm (6.81 in) < 50 mm (1.96 in)
250 mm (10 in) 236 mm (9.29 in) < 50 mm (1.96 in)