Endress+Hauser Micropilot FMR56 - Page 42

Micropilot FMR56, FMR57
42 Endress+Hauser
Installation with hinged flange
The length of the antenna must be taken into account in the case of hinged flanges.
A0018878
Dismantling the parabolic reflector
The parabolic reflector can be dismantled for installation in a nozzle:
2
1
A0018877
1 Parabolic reflector
2 4 screws; tightening torque: 3 Nm
Alignment unit for FMR57
An angle of inclination of up to 15 ° in all directions can be set for the antenna axis using the
alignment unit. The alignment unit is used to optimally align the radar beam to the bulk solid.