Endress+Hauser Micropilot FMR56 - Page 59

Micropilot FMR56, FMR57
Endress+Hauser 59
FMR57 with horn antenna - high-temperature version
A
CB D
R
øD
øD
ød
L
L
50 (1.97)
201 (7.91)
207 (8.15)
8(0.31)
8(0.31)
23(0.31)
ød
50 (197)
b
43 (1.69)
ø40 (1.57)
ø40
(1.57)
207 (8.15)
201 (7.91)
A0023394
 37 Dimensions of FMR57 with horn antenna - high-temperature version; engineering unit: mm(in)
A Process connection: alignment unit with UNI flange
B Process connection: UNI flange
C Process connection: flange
D Process connection: thread MNPT1-1/2 or R1-1/2
R Reference point of measurement
ØD As per flange standard ASME B16.5 / EN1092-1 / JIS B2220
b As per flange standard ASME B16.5 / EN1092-1 / JIS B2220
Applies to the following device versions
• Feature 070 "Antenna"
• BC: horn 80mm/3"
• BD: horn 100mm/4"
• Feature 090 "Seal"
D4: graphite, -40 to 400°C/-40 to 752°F
Antenna L Ød
Horn 80mm/3" 211 mm (8.37 in) 75 mm (2.95 in)
Horn 100mm/4" 430 mm (16.9 in) 95 mm (3.74 in)