Micropilot FMR56, FMR57
82 Endress+Hauser
Feature 100 in the product structure Process connection
XZG UNI slip-on flange 4"/DN100/100, PP
X0G UNI slip-on flange 6"/DN150/150, PP
• Process connections that do not have CRN approval are not listed in this table.
• Please refer to the product structure to discover which process connections are available for a
specific device type.
• A CRN approval is available on request for some process connections not listed in the product
structure.
• CRN-approved devices are labeled with registration number OF15872.5C on the nameplate.
An additional pressure restriction applies for the device versions listed in the table below if they
are CRN-approved. The pressure range indicated in the "Process" section continues to apply for
device versions not listed in the table below.
Product Antenna
1)
Process connection
2)
Seal
3)
Max. pressure
FMR50/FMR56 BN: horn 80mm/3" XWG: UNI slip-on flange 3" 1.6 bar (23.2 psi)
XZG: UNI slip-on flange 4" 1.5 bar (21.75 psi)
X0G: UNI slip-on flange 6" 1.5 bar (21.75 psi)
BR: horn 100mm/4" XZG: UNI slip-on flange 4" 12 bar (17.4 psi)
X0G: UNI slip-on flange 6" 1.8 bar (26.1 psi)
1) Feature 070 in the product structure
2) Feature 100 in the product structure
3) Feature 090 in the product structure
To Next Page
Loading...
