Endress+Hauser Micropilot FMR56 - Page 96

Micropilot FMR56, FMR57
96 Endress+Hauser
Horn protection for horn antenna
Accessories Description
Horn protection for horn
antenna 80 mm (3 in) or
100 mm (4 in)
L
B
A
øD
ød
A0019143
A Horn antenna of the Micropilot (not included in the delivery of the horn protection)
B Horn protection
⌀d Diameter of horn protection (see table below)
⌀D Minimum nozzle diameter (see table below)
L Length of antenna with horn protection (see table below)
For details, see the Installation Instructions SD01084F.
Process conditions
• Maximum vessel pressure: 0.5 bar (7.252 psi)
• Maximum process temperature: 130 °C (266 °F)

Explosion Hazard
Avoid electrostatic charge of the horn protection.
Horn protection for FMR57
Antenna
1)
Order number for horn
protection
Dimensions of antenna + horn protection
L Ød ØD
BC: horn 80mm/3" 71105890 238 mm (9.4 in) 96 mm (3.78 in) ≥ DN100
BD: horn 100mm/4" 71105889 450 mm (17.7 in) 116 mm (4.57 in) ≥ DN150
1) Feature 070 in the product structure
The horn protection can also be ordered together with the device. Product structure: feature
610 "Accessory mounted", option OW "Horn protection, PTFE".