Endress+Hauser Nivotester FTR525 - Access to the Operating Menu Via the Local Display; Operational Display (Initialization); 14 Measured Value Display

Nivotester FTR525
Endress+Hauser
23
Operating options
7�3 Access to the operating menu via the local display
7�3�1 Operational display (initialization)
1M
2M
Grenzstand 1
-
8.8.8.8.8
Max
M i n
4
5
3
2
1
13 Initializationdisplay
1 DotmatrixdisplayforTag,bargraph,unit,switchpoint,etc.
2 Measuringchanneldisplay:1M=limitleveldetection;2M=bulkflowdetection
3 Measuredvalueorfunction/functiongroupnumberdisplay
4 Operationlockdisplay
5 Minimum/maximumvaluedisplay
7�3�2 Measured value display
Grenzstand 1
%
068
▴
▴
▴▴
1M
3
4
5
2
1
14 Measuredvaluedisplay
1 Relay/SSR2switchpointsdisplay
2 Measuredvaluebargraphdisplay
3 Numericalmeasuredvaluedisplay
4 Measuredvalueunitdisplay
5 Relay/SSR1switchpointsdisplay
Depending on the setting, the measured value display will display either the measured

channel (2M) or an alternating display of the measured values of both measuring
channels (1M/2M).
Example: Bar graph of 1M/2M alternating
Grenzstand 1
%
068
▴
▴
1M

5 seconds
Grenzstand 1
%
025
▴▴
2M
Overview of all available display options
