Nivotester FTR525
Endress+Hauser
25
Operating options
7�3�4 Minimum/maximum value display
Grenzstand 1
%
▴
▴
1M
%
052
1M
M
M i n
%
075
1M
Max
The following applies for the display of the minimum/maximum value:
value, and pressing this button again will switch to the display for the maximum value
• In the case of an alternating display between measuring channel 1 (1M) and measuring
channel 2 (2M), this display will alternate as well.
• The minimum/maximum values are determined and saved every 15 minutes, and the
previous values are overwritten.
7�3�5 Dot matrix display
In addition to the display options for the dot matrix display illustrated in the previous
sections, it can also be used for inputting the function parameters.
Example: Alphanumeric input of a tag
Tag
▾
3 1 1 1
5 seconds
█ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 1 1 1
• Numbers 0-9
• Letters a-z, A-Z
In addition, the following symbols are used in editing mode:
•
�
The digits 0-9 and the decimal point are available for entering numbers.
In addition to functions with free text or number input, there are also functions with
option.
To Next Page
Loading...
