Endress+Hauser Nivotester FTR525 - 2 Basic Safety Instructions; Requirements for Personnel; Designated Use

8
Nivotester FTR525
Endress+Hauser
Basic safety instructions
2 Basic safety instructions
2�1 Requirements for personnel
The personnel for installation, commissioning, diagnostics and servicing must meet the
following requirements:






Operating personnel must meet the following requirements:

owner/operator

2�2 Designated use
The process transmitter FTR525 provieds the power supply for the microwave barrier
Soliwave. It records simultaneously the measurements of the point level detection and

parameterised by the FTR525.
• The manufacturer is not liable for damage caused by improper or non-designated use.
Conversion work or changes must not be carried out on the device.
• The device is designed for use in industrial environments and may only be operated
when installed.
• The device can and may only be repaired by the manufacturer.
Hazardous area
The process transmitter with control unit FTR525, as an associated apparatus, is only
permissible exclusively for use outside of the hazardous area.
Observe Safety Instructions!
7
Nivotester FTR525
FDR57 FQR57
- .
1 Useinhazardousarea