Endress+Hauser Nivotester FTR525 - Show Data Logging; Min;Max Limit (1 M); Min;Max Limit (2 M); Reset Min;Max

46
Nivotester FTR525
Endress+Hauser
Operation
9�4 Showdatalogging
Using the following functions, the minimum and maximum measured values since the last
switching-on of the FTR525 can be displayed and even deleted, if so desired.
9�4�1 Min/Max limit (1M)
Application
2000
→
Application analysis
2500
→
Min/Max limit (1M)
2510
This function is used to display the logged minimum and maximum values of the limit
detection (1M).
Example:
Grenzstand 1
088
2 5 1 0
1M
[Min. 066] [Max. 100]
3
2
1
28 DisplayMin/Maxvaluesofthelimitdetection(1M)
1 Percentagevalueofthecurrentsignalstrength
2 Maximumpercentagevalueofthesignalstrength
3 Minimumpercentagevalueofthesignalstrength
9�4�2 Min/Max limit (2M)
Application
2000
→
Application analysis
2500
→
Min/Max motion (2M)
2520
This function is used to display the logged minimum and maximum values of the motion
detection (2M) (see function 2520).
9�4�3 Reset Min/Max
Application
2000
→
Application analysis
2500
→
Reset Min/Max
2530
This function is used to reset (clear) the logged minimum and maximum measurement
values of the limit (1M, function 2510) and motion detection (2M, function 2520).
Options: "Reset Min/Max", "Abort"