Endress+Hauser Nivotester FTR525 - Page 38

38
Nivotester FTR525
Endress+Hauser
Commissioning
The selection options marked with a * are only available for the FTR525 with optional
bulk flow detection.
Option Description
% limit (1M)
Grenzstand 1
%
068
1M
The percentage value of the level limit detection
(measuring channel 1, 1M) is displayed.
Bargraph limit (1M)
Grenzstand 1
%
068
1M
The percentage value and associated bargraph (0-100 %)
of the level limit detection (measuring channel 1, 1M) are
displayed.
Grenzstand 1
%
068
▴
▴
1M
If one or two switching outputs are assigned to measuring
channel 1, the corresponding switch points are also
displayed (switching output 1: Upper switch points;
switching output 2: Lower switch points).
Tag limit (1M)
Grenzstand 1
%
068
1M
Measurement 1
The tag and the percentage value of the level limit
detection (measuring channel 1, 1M) are displayed.
Enter Tag
37
% motion (2M)*
Grenzstand 1
%
025
2M

channel 2, 2M) is displayed.
Bargraph motion (2M)*
Grenzstand 1
%
025
2M
The percentage value and associated bargraph (0-100 %)

displayed.
Grenzstand 1
%
025
▴▴
2M
If one or two switching outputs are assigned to measuring
channel 2, the corresponding switch points are also
displayed (switching output 1: Upper switch points;
switching output 2: Lower switch points).
Tag motion (2M)*
Grenzstand 1
%
025
Measurement 1
2M

(measuring channel 2, 2M) are displayed.