Endress+Hauser Proline Promass P 300 - Accessories; Device-Specific Accessories

Proline Promass P 300
Endress+Hauser 107
Device-specific accessories For the transmitter
Accessories Description
Proline 300 transmitter Transmitter for replacement or storage. Use the order code to define the following
specifications:
• Approvals
• Output
• Input
• Display/operation
• Housing
• Software

Order code: 8X3BXX

Installation Instructions EA01150
Remote display and
operating module
DKX001
• If ordered directly with the measuring device:
Order code for "Display; operation", option O "Separate 4-line display, illum.;
10 m (30 ft)Cable; touch control".
• If ordered separately:
– Measuring device: order code for "Display; operation", option M "None,
prepared for separate display".
– DKX001: Via the separate product structure DKX001.
• If ordered subsequently:
DKX001: Via the separate product structure DKX001.
Mounting bracket for DKX001
• Ordered directly with the DKX001:
Order code for "Enclosed accessories", option RA "Mounting bracket, 1"/2" pipe".
• If ordered subsequently: order number: 71340960
Connecting cable (replacement cable)
Via the separate product structure: DKX002

Further information on display and operating module DKX001→  90.

Special Documentation SD01763D
External WLAN antenna External WLAN antenna with 1.5 m (59.1 in) connecting cable and two angle
brackets. Order code for "Enclosed accessories", option P8 "Wireless antenna wide
area".

• The external WLAN antenna is not suitable for use in hygienic
applications.
• Further information on the WLAN interface →  97.

Order number: 71351317

Installation Instructions EA01238D
Protective cover Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.

Order number: 71343505

Installation Instructions EA01160