Endress+Hauser Proline Promass P 300 - Pin Assignment, Device Plug

Proline Promass P 300
Endress+Hauser 27
Order code for "Input; output 1", option RA "PROFINET"
Order code for Cable entry/connection →  30
"Electrical connection" 2 3
L, N, P, U Connector M12 × 1 –
R
1) 2)
, S
1) 2)
, T
1) 2)
, V
1) 2)
Connector M12 × 1 Connector M12 × 1
1) Cannot be combined with an external WLAN antenna (order code for "Enclosed accessories", option P8) of
an RJ45 M12 adapter for the service interface (order code for "Accessories mounted", option NB) or of the
remote display and operating module DKX001.
2) Suitable for integrating the device in a ring topology.
Order code for "Input; output 1", option NA "EtherNet/IP"
Order code for Cable entry/connection →  30
"Electrical connection" 2 3
L, N, P, U Connector M12 × 1 –
R
1) 2)
, S
1) 2)
, T
1) 2)
, V
1) 2)
Connector M12 × 1 Connector M12 × 1
1) Cannot be combined with an external WLAN antenna (order code for "Enclosed accessories", option P8) of
an RJ45 M12 adapter for the service interface (order code for "Accessories mounted", option NB) or of the
remote display and operating module DKX001
2) Suitable for integrating the device in a ring topology.
Order code for "Accessory mounted", option NB "Adapter RJ45 M12 (service interface)"
Order code Cable entry/coupling →  30
"Accessory mounted" Cable entry
2
Cable entry
3
NB Plug M12 × 1 –
Pin assignment, device plug FOUNDATION Fieldbus
1
2
4
3
Pin Assignment Coding Plug/socket
1 + Signal + A Plug
2 - Signal –
3 Grounding
4 Not assigned
PROFIBUS PA
1
2
4
3
Pin Assignment Coding Plug/socket
1 + PROFIBUS PA + A Plug
2 Grounding
3 - PROFIBUS PA –
4 Not assigned