Endress+Hauser Proline Promass P 300 - Device Plugs Available

Proline Promass P 300
26 Endress+Hauser
Modbus RS485
Supply voltage Input/output 1 Input/output 2 Input/output 3
1 (+) 2 (–) 26 (B) 27 (A) 24 (+) 25 (–) 22 (+) 23 (–)
The terminal assignment depends on the specific device version ordered →  12.
PROFINET
Supply voltage Input/output 1 Input/output 2 Input/output 3
1 (+) 2 (–) PROFINET
(RJ45 connector)
24 (+) 25 (–) 22 (+) 23 (–)
The terminal assignment depends on the specific
device version ordered →  12.
EtherNet/IP
Supply voltage Input/output 1 Input/output 2 Input/output 3
1 (+) 2 (–) EtherNet/IP
(RJ45 connector)
24 (+) 25 (–) 22 (+) 23 (–)
The terminal assignment depends on the specific
device version ordered →  12.
Terminal assignment of the remote display and operating module →  31.
Device plugs available
Device plugs may not be used in hazardous areas!
Device plugs for fieldbus systems:
Order code for "Input; output 1"
• Option SA "FOUNDATION Fieldbus" →  26
• Option GA "PROFIBUS PA" →  26
• Option RA "PROFINET" →  27
• Option NA "EtherNet/IP" →  27
Device plug for connecting to the service interface:
Order code for "Accessory mounted"
option NB, adapter RJ45 M12 (service interface) →  28
Order code for "Input; output 1", option SA "FOUNDATION Fieldbus"
Order code for Cable entry/connection →  30
"Electrical connection" 2 3
M, 3, 4, 5 7/8" connector –
Order code for "Input; output 1", option GA "PROFIBUS PA"
Order code for Cable entry/connection →  30
"Electrical connection" 2 3
L, N, P, U Connector M12 × 1 –