Endress+Hauser Proline Promass P 300 - Clamp Connection DIN 11864-3; BBS Clamp Connection

Proline Promass P 300
Endress+Hauser 67
Clamp connection DIN 11864-3
A
B
X
L
X
A0016903
 38 Detail X: Asymmetrical process connection; the part shown in blue is provided by the supplier.
Length tolerance for dimension L in mm:
+1.5 / –2.0
Clamp DIN 11864-3 Form A, with notch, for pipe according to DIN 11866 series A
1.4435 (316L)
Order code for "Process connection", option KLW
DN
[mm]
A
[mm]
B
[mm]
L
[mm]
8 34.0 16.05 370
15 34.0 16.05 474
25 50.5 26.05 614
40 64.0 38.05 738
50 77.5 50.05 853
Ra
max
0.76 µm: order code for "Measuring tube material", option BB, TD
Ra
max
0.38 µm electropolished: order code for "Measuring tube material", option BC, TG
BBS clamp connection
L
X
A
B
X
A0016908
 39 Detail X: Asymmetrical process connection; the part shown in blue is provided by the supplier.
Length tolerance for dimension L in mm:
+1.5 / –2.0