Endress+Hauser Proline Promass P 300 - Eccentric Clamp Connection DIN 32676; Eccentric Clamp ISO 2852

Proline Promass P 300
70 Endress+Hauser
Eccentric clamp ISO 2852, for pipe according to DIN11866 series B
1.4435 (316L)
Order code for "Process connection", option JEC
DN
[mm]
A
[mm]
B
[mm]
L
[mm]
50 64.0 44.30 853
Ra
max
0.76 µm: order code for "Measuring tube material", option BB, TD
Ra
max
0.38 µm electropolished: order code for "Measuring tube material", option BC, TG
Additional information on "Eccentric clamps"
Eccentric clamp ISO 2852, for pipe according to DIN11866 series B, for connection to DN15 pipes
1.4435 (316L)
Order code for "Process connection", option JED
DN
[mm]
A
[mm]
B
[mm]
L
[mm]
25 50.5 18.10 606
Ra
max
0.76 µm: order code for "Measuring tube material", option BB, TD
Ra
max
0.38 µm electropolished: order code for "Measuring tube material", option BC, TG
Additional information on "Eccentric clamps"
Eccentric clamp connection DIN 11864-3
X
L
A
B
X
A0016904
 41 Detail X: Asymmetrical process connection; the part shown in blue is provided by the supplier.
Length tolerance for dimension L in mm:
+1.5 / –2.0
Eccentric clamp DIN 11864-3 Form A, with notch, for pipe according to DIN 11866 series A
1.4435 (316L)
Order code for "Process connection", option KNW
DN
[mm]
A
[mm]
B
[mm]
L
[mm]
8 34.0 10.00 370
15 34.0 16.00 474
25 50.5 26.00 624
50 77.5 50.00 869
Ra
max
0.76 µm: order code for "Measuring tube material", option BB, TD
Ra
max
0.38 µm electropolished: order code for "Measuring tube material", option BC, TG
Additional information on "Eccentric clamps"