Proline t-mass 65 Installation
Endress+Hauser
13
2.3.3 Installing the wall-mount housing
"
Caution!
• Make sure that the ambient temperature does not exceed the permitted range.
• Always install the wall-mount housing in such a way that the cable entries point downwards.
Mounted directly on the wall
Pipe mounting
A0007542
1. Connection compartment
2. Securing screws M6 (max. ø 6.5 mm (0.25 inch);
screw head max. ø 10.5 mm (0.4 inch)
3. Housing bores for securing screws
A0007543
"
Caution!
Danger of overheating! If the device is mounted on a
warm pipe, make sure that the housing temperature does
not exceed +60 °C (+140 °F) which is the maximum
temperature permitted.
1
2
3
3
90 (3.54)
35 (1.38)
192 (7.56)
81.5 (3.2)
mm (inch)
mm (inch)
Ø 20…70
(Ø 0.79…2.75)
~ ~ 6.1)155 (
To Next Page
Loading...
