11 Description of device functions Prosonic Flow 92
82 Endress+Hauser
System Reset Use this function to re-initialise the memory and reset all current settings to
the factory settings.
Options:
NO – YES
Caution!
During memory initialisation, all data sets including Site Setup and log data
are erased irreversibly.
Exception:
The operating language selection remains unchanged as well as the settings
of the following functions:
– Pipe Diameter (see Page 69)
– Pipe Material (see Page 69)
– Wall Thickness (see Page 70)
– Liner Material (see Page 70)
– Liquid (see Page 70)
– Sensor Config. (see Page 71)
– Sensor Type (see Page 71)
– Burst Voltage (see Page 71)
– Input Range (see Page 84)
– Unit (Output) (see Page 85)
– Output Range (see Page 85)
System Setup
To Next Page
Loading...
