Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Page 107

Prosonic S FMU90 PROFIBUS DP Operating menu
Endress+Hauser 107
14.9.2 Submenu "In/output info"
Parameter set IX108 "Level N"
• Input
• Sensor selection
• Detected
Parameter set IX109 "Flow N"
• Input
• Sensor selection
• Detected
Parameter set IX10B "Relay N"
Function
14.9.3 Submenu "Trend display → Trend output N"
Parameter set IX10F Trend output N
Time interval
14.9.4 Submenu "Min/max values"
Parameter set IX302 "Level → Level (LVL) N"
• Max. value
• Min. Value
• Reset
Parameter set IX302 "Flow → Flow N"
• Max. value
• Min. Value
• Reset
Parameter set IX302 "Temperature → Temperature sen. N"
• Max. value
• Min. Value
14.9.5 Submenu "Envelope curve"
Parameter set IX126 "En. curve sen. N"
• Plot settings (choice of displayed curves)
• Plot settings (choice between an individual curve and cyclic presentation)
14.9.6 Submenu "Error list"
Parameter set E1002 "Actual error"
• 1:
• 2:
• ...
Parameter set E1003 "Last error"
• 1:
• 2:
• ...
14.9.7 Submenu "Diagnostics"
Parameter set E1403 "Operating hours"
Operating hours
Parameter set E1404 "Actual distance"
Act. distance N